Potain Hup C 40-30
Features:
- Max capacity: 8,800 lb (4,000 kg)
- Max tip capacity: 2,200 lb (1,000 kg)
- Max operating hook radius: 131 ft (40 m)
- Max hook height with jib horizontal: 100 ft (30 m)
- Max hook height with jib at 20°: 134 ft (40.7 m)
- Moving with the folded crane at 82 fpm with front leveling up to 30% grade and side leveling up to 12% grade
- Moving with the erected crane at 33 fpm with up to 5% front and side grade
Chassis: Steel Structure with hydraulic telescopic outriggers and hydraulic driven crawlers. 16.4 ft (5 m) x 14.8 ft (4.5 m) outrigger spread with 8.2 ft (2.5 m) maximum tail swing. 23.6 in (600 mm) square outrigger pads are stowed on the crane during transport.
Ballast: Ballast requirement for the crane consists of fifteen (15) concrete slabs each weight 3,850 lbs.
Mast: Telescoping and foldable mast is raised by an auxiliary winch and pulley block. Hook heights of 84 ft ( m) and 98 ft ( m) are achievable. 360˚ rotation possible during raising sequence.
Jib: 131 ft (40 m) radius offsettable lattice jib. The jib can be offset to 10 deg or 20 deg. Opening and aligning are carried out automatically by four hydraulic cylinders.
Swing: HPS 142 slewing mechanism with a maximum swing speed of 0.9 rpm. Progressive control of the speed with counter-slewing possible, anti-load swinging system makes aligning the load and jib easier. Multiple rpm speeds possible depending upon parameter selected.
Hoist: 18 HPL 10: 18 HP variable frequency hoist with 1,100 lb (500 kg) line pull. Progressive speed change according to the accelerating or decelerating ramps. Optima allows the hoist to adapt its speed to the weight of the load.
Trolley: 3 DVF 5: 3 HP variable frequency hoist with 1,100 lb (500 kg) line pull. Progressive speed change according to acceleration or deceleration ramps controlled by the frequency converter.
Reeving: SM/DM block for 2 (SM) or 4-part line (DM). Manual removal of one pin to change between SM and DM.
No electrical requirements needed. The crane includes an exclusive embedded power generator otherwise known as the “powerpack” which includes:
- EPA Tier 4 / EU stage V
- Provides power for both the crawler hydraulic functionalities and the cranes electrical power needs.
The wireless remote control provides information to the operator about wind speed, radius, hook height, load, and moment. Lights and buzzers alert the operator when nearing limits of operation. Battery charger and extra battery are provided with the crane.
Auxiliary push-button tethered remote ensures continual operation in case of battery or other malfunction of the wireless remote control. Optional tethered remote control ensures continuous operation with the same functions and ergonomics as the standard wireless remote control.
A second wireless remote control provides access to the added crawler capabilities as well as the hydraulic stabilizers.
Client’s Testimonial
